R&S ESU Series Operating Manual page 293

R&S ESU
SYSTEM INFO
SERVICE
Side menu
FIRMWARE UPDATE
NOISE SRC ON/OFF
PRESET RECEIVER
PRESET ANALYZER
OPEN START MENU
IF SHIFT
The following settings can be modified here:
• The REFERENCE INT/EXT softkey determines the source of the reference. For
details refer to section
• The LISN softkey opens a submenu for the V-networks (LISNs) control. For details
refer to section
• The PREAMP softkey switches on the RF preamplifier gain in analyzer mode. The
softkey is only available for measurements with activated preselection. For details
refer to section
• The PRESELECT ON/OFF softkey is used to switch the preselection. For details
refer to section
4.262
!
HARDWARE INFO
STATISTICS
SYSTEM MESSAGES
CLEAR ALL MESSAGES
!
INPUT RF
INPUT CAL
SELFTEST
SELFTEST RESULTS
ENTER PASSWORD
1. Side menu
CAL GEN 128 MHZ
CAL GEN COMB PULSE
2. side menu
COMMAND TRACKING
EXPORT / IMPORT DEV
DATA
!
FIRMWARE UPDATE
RESTORE FIRMWARE
UPDATE PATH
!
IF SHIFT OFF
IF SHIFT A
IF SHIFT B
AUTO
"External Reference" on page
"Control of V-Networks (LISNs)" on page
"Preamplification and Preselection" on page
"Preamplification and Preselection" on page
Instrument Functions
4.263.
4.265.
4.266.
4.266.
Operating Manual 1302.6163.12 - 03
Basic Settings