R&S ESU Series Operating Manual page 740

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 13 of 47)
R&S FSE CALCulate<1|2>:MARKer<1...4>:MAXimum:
ESU RIGHt
R&S FSE CALCulate<1|2>:MARKer<1...4>:MAXimum[:
ESU PEAK]
R&S FSE CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:MINimum:RIGHt
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:MINimum[:
ESU PEAK]
R&S FSE CALCulate<1|2>:MARKer<1...4>:PEXCursion
ESU
FSE CALCulate<1|2>:MARKer<1...4>:READout
FSE CALCulate<1|2>:MARKer<1...4>:
SCOupled[STATe]
FSE CALCulate<1|2>:MARKer<1...4>:STEP:AUTO
FSE CALCulate<1|2>:MARKer<1...4>:STEP[:
INCRement]
R&S FSE CALCulate<1|2>:MARKer<1...4>:TRACe
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:X
ESU
R&S CALCulate<1|2>:MARKer<1...4>:X:SLIMits:LEFT
ESU
R&S CALCulate<1|2>:MARKer<1...4>:X:SLIMits:RIGHt
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>:X:SLIMits[:
ESU STATe]
R&S FSE CALCulate<1|2>:MARKer<1...4>:Y?
ESU
R&S CALCulate<1|2>:MARKer<1...4>:Y:PERCent
ESU
R&S FSE CALCulate<1|2>:MARKer<1...4>[:STATe]
ESU
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
Parameter Notes
<numeric_value>
MPHase | RIMaginary not available for
R&S ESU
ON | OFF not available for
R&S ESU
ON | OFF not available for
R&S ESU
<numeric_value> not available for
R&S ESU
1 to 3 R&S ESU: 3 traces are
available per screen
FSE: 4 traces are
available in full screen
mode and 2 traces per
screen in split screen
mode
0 to MAX (frequency | additional unit SYM is
sweep time) available for FSE
0 to MAX (frequency | new function for
sweep time) R&S ESU. Replaces
DISP:FLIN and DISP:
TLIN commands of the
FSE
0 to MAX new function
(frequency|sweep time) forR&S ESU. Replaces
DISP:FLIN and DISP:
TLIN commands of the
FSE
ON | OFF
<numeric_value> new function for
R&S ESU
ON | OFF
6.301