R&S Esu Initial Configuration - Preset Key - R&S ESU Series Operating Manual

R&S ESU
4.2 R&S ESU Initial Configuration – PRESET Key
PRESET Using the PRESET key, the R&S ESU can be set to a predefined initial state.
The settings are selected in a way that the RF input is always protected against
overload, provided that the applied signal levels are in the allowed range for the
instrument.
The initial instrument state set by the PRESET key can be adapted to arbitrary
applications using the STARTUP RECALL function. With this function the STAR-
TUP RECALL data set is loaded upon pressing the PRESET key. For further infor-
mation refer to section
page
Two predefined initial states can be selected in the SETUP side menu. For details
on the preset mode refer to section
SETUP
page
Pressing the PRESET key causes the R&S ESU to enter its initial state according to
one of the following tables:
4.6
"Saving and Recalling Data Sets – FILE Key" on
4.299.
Key", "PRESET RECEIVER" on page 4.297
4.297.
R&S ESU Initial Configuration – PRESET Key
"Instrument Setup and Interface Configuration –
and "PRESET ANALYZER" on
Operating Manual 1302.6163.12 - 03
Instrument Functions