R&S ESU Series Operating Manual page 755

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 28 of 47)
FSE MMEMory:SELect[:ITEM]:CVL[:ACTive]
R&S FSE MMEMory:SELect[:ITEM]:DEFault
ESU
FSE MMEMory:SELect[:ITEM]:GSETup
FSE MMEMory:SELect[:ITEM]:HCOPy
R&S FSE MMEMory:SELect[:ITEM]:HWSettings
ESU
R&S FSE MMEMory:SELect[:ITEM]:LINes:ALL
ESU
FSE MMEMory:SELect[:ITEM]:LINes:ALL
FSE MMEMory:SELect[:ITEM]:LINes[:ACTive]
FSE MMEMory:SELect[:ITEM]:MACRos
R&S FSE MMEMory:SELect[:ITEM]:NONE
ESU
R&S FSE MMEMory:SELect[:ITEM]:SCData
ESU
R&S MMEMory:SELect[:ITEM]:TRACe[:ACTive]
ESU
FSE MMEMory:SELect[:ITEM]:TRACe<1...4>
FSE MMEMory:SELect[:ITEM]:TRANsducer:ALL
FSE MMEMory:SELect[:ITEM]:TRANsducer[:ACTive]
R&S FSE MMEMory:STORe:STATe
ESU
R&S FSE MMEMory:STORe:TRACe
ESU
FSE OUTPut:AF:SENSitivity
FSE OUTPut:UPORt<1|2>:STATe
FSE OUTPut:UPORt<1|2>[:VALue]
R&S FSE OUTPut<1|2>[:STATe]
ESU
FSE READ:BURSt:FERRor:AVERage?
6.316
Remote Control – Description of Commands
Parameter Notes
ON | OFF not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU (default
setting on the R&S ESU)
ON | OFF not available for
R&S ESU (default
setting on the R&S ESU)
ON | OFF
ON | OFF
ON | OFF
ON | OFF not available for
R&S ESU (default
setting on the R&S ESU)
ON | OFF not available for
R&S ESU
ON | OFF
ON | OFF no numeric suffixes
behind TRACe
ON | OFF numeric suffixes behind
TRACe
ON | OFF not available for
R&S ESU
ON | OFF not available for
R&S ESU
1,path
1 to 3,path
<numeric_value> not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU
#B00000000 to not available for
#B11111111 R&S ESU
ON | OFF
not available for
R&S ESU and FSET
Operating Manual 1302.6163.12 - 03