R&S ESU Series Operating Manual page 288

R&S ESU
CENTER B = The CENTER B = MARKER A and CENTER A = MARKER B softkeys couple the
MARKER A | center frequency in diagram B with the frequency of marker 1 in diagram A and the
CENTER A = center frequency in diagram B with the frequency of marker 1 in diagram B. The two
MARKER B softkeys are mutually exclusive.
This coupling is useful, e.g. for viewing the signal at the marker position in diagram
A with higher frequency resolution or in the time domain in diagram B.
If marker 1 is off, it is switched on and set to the maximum of the trace in the active
diagram.
The softkeys are only available in analyzer mode.
Remote command:
CONFIG
SCREEN TITLE
DISPLAY
TIME+DATE ON/OFF
LOGO ON/OFF
ANNOTATION ON/OFF
DATA ENTRY OPAQUE
DEFAULT COLORS 1/
DEFAULT COLORS 2
DISPLAY PWR SAVE
Side menu
SELECT OBJECT
BRIGHTNESS
TINT
SATURATION
PREDEFINED COLORS
The CONFIG DISPLAY softkey opens a submenu allowing additional display items
to be added to the screen. In addition, the display power-save mode
PWR SAVE
SCREEN TITLE The SCREEN TITLE softkey activates the entry of a title for the active diagram A or
B. It switches on or off a title that is already input. The length of the title is limited to
max. 20 characters.
Remote command:
TIME+DATE The TIME+DATE ON/OFF softkey switches on or off the display of date and time
ON/OFF above the diagram.
Remote command:
LOGO ON/OFF The LOGO ON/OFF softkey switches the Rohde & Schwarz company logo dis-
played in the upper left corner of the display screen on or off.
Remote command:
Operating Manual 1302.6163.12 - 03
INST:COUP CF_B
INST:COUP CF_A
softkey) and the colors of the display elements can be set here.
DISP:WIND1:TEXT 'Noise Meas'
DISP:WIND1:TEXT:STATe ON
DISP:TIME OFF
DISP:LOGO ON
Instrument Functions
Basic Settings
(DISPLAY
4.257