R&S ESU Series Operating Manual page 301

R&S ESU
DELETE
VIEW TRANSDUCER
REFLVL ADJ AUTO MAN
PAGE UP
PAGE DOWN
Tables show the settings of already existing transducer factors and transducer sets
as well as the settings of the active transducer factor or transducer set.
The ACTIVE TRANSDUCER FACTOR / SET table indicates the active transducer
factor or the set with the associated name, frequency range and unit. If no factor or
set is active, NONE is displayed in the table. Additional information can be entered
in a comment line. If a transducer factor is active, the selected interpolation is dis-
played in addition, if a set is active, the break setting is displayed.
The TRANSDUCER FACTOR table comprises all the defined factors with name and
unit. If the number of defined transducer factors exceeds the number of possible
lines in the table, the table will be scrolled.
The TRANSDUCER SET table comprises all the defined transducer sets with the
corresponding information.
Only one set or transducer can be activated. An already active transducer factor or
set is switched off automatically if another one is switched on. An activated trans-
ducer factor or set is marked with a check sign.
4.270
RANGES 1-5/6-10
SAVE TRD SET
TRANSDUCER FACTOR
Name
Cable_1 dB
HK116 dBuV/m
HL223 dBuV/m
Unit
Operating Manual 1302.6163.12 - 03
Instrument Functions
Basic Settings