R&S ESU Series Operating Manual page 764

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 37 of 47)
R&S [SENSe<1|2>:]LIST:POWer[:SEQuence]
ESU
R&S [SENSe<1|2>:]LIST:POWer:SET
ESU
R&S [SENSe<1|2>:]LIST:POWer:STATe
ESU
FSE [SENSe<1|2>:]MIXer:BIAS
FSE [SENSe<1|2>:]MIXer:BIAS:LIMit:MIN
FSE [SENSe<1|2>:]MIXer:BIAS:LIMit[:MAX]
FSE [SENSe<1|2>:]MIXer:BLOCk
FSE [SENSe<1|2>:]MIXer:HARMonic
FSE [SENSe<1|2>:]MIXer:HARMonic:BAND
FSE [SENSe<1|2>:]MIXer:HARMonic:TYPE
FSE [SENSe<1|2>:]MIXer:LOSS:HIGH
FSE [SENSe<1|2>:]MIXer:LOSS:TABLE
FSE [SENSe<1|2>:]MIXer:LOSS[:LOW]
FSE [SENSe<1|2>:]MIXer:PORTs
FSE [SENSe<1|2>:]MIXer:SIGNal
FSE [SENSe<1|2>:]MIXer:THReshold
FSE [SENSe<1|2>:]MIXer[:STATe]
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
Parameter Notes
<analyzer freq>, new function for
<ref level>, R&S ESU
<rf att>,
<el att>,
<filter type>,
<rbw>,
<vbw>,
<meas time>,
<trigger level>,...
<PEAK meas>, new function for
<RMS meas>, R&S ESU
<AVG meas>,
<trigger mode>,
<trigger slope>,
<trigger offset>,
<gate length>
ON | OFF new function for
R&S ESU
<numeric_value> not available for
R&S ESU
<numeric_value> not available for
R&S ESU
<numeric_value> not available for
R&S ESU
ON | OFF not available for
R&S ESU
<numeric_value> not available for
R&S ESU
A | Q | U | V | E | W | F | not available for
D | G | Y | J R&S ESU
ODD | EVEN | EODD not available for
R&S ESU
<numeric_value> not available for
R&S ESU
<file_name> not available for
R&S ESU
<numeric_value> not available for
R&S ESU
2 | 3 not available for
R&S ESU
2 | 3 not available for
R&S ESU
0.1 to 100 dB not available for
R&S ESU
ON | OFF not available for
R&S ESU
6.325