R&S ESU Series Operating Manual page 582

R&S ESU
MMEMory:LOGO:NAME <file_name>
This command selects a graphics file which will appear as the logo in the header of the test report.
The file name should comply with DOS conventions.
Parameter: <file_name> ::= DOS file name
Example:
"MMEM:LOGO:NAME 'COMPANY.BMP'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A
MMEMory:MDIRectory <directory_name>
This command creates a new directory. The file name includes indication of the path and may also
include the drive name. The path name complies with DOS conventions.
Parameter: <directory_name>::= DOS path name
Example:
"MMEM:MDIR 'D:\USER\DATA'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A
This command is an event and therefore has no *RST value and no query.
MMEMory:MOVE <file_source>,<file_destination>
This command renames existing files, if <file_destination> contains no path indication. Otherwise the
file is moved to the indicated path and stored under the file name specified there, if any.
The file name includes indication of the path and may also include the drive. The path name complies
with DOS conventions.
Parameter: <file_source>,<file_destination> ::= <file_name>
<file_name> ::= DOS file name
Example:
"MMEM:MOVE 'D:\TEST01.CFG','SETUP.CFG'"
'Renames TEST01.CFG in SETUP.CFG in directory D:\.
"MMEM:MOVE 'D:\TEST01.CFG','D:\USER\DATA'"
'Moves TEST01.CFG from D:\ to D:\USER\DATA.
"MMEM:MOVE 'D:\TEST01.CFG','D:\USER\DATA\SETUP.CFG'"
'Moves TEST01.CFG from D:\ to D:\USER\DATA and renames the file in
SETUP.CFG.
Characteristics: *RST value: -
SCPI: conform
Mode: R, A
This command is an event and therefore has no *RST value and no query.
MMEMory:MSIS <device>
This command changes to the drive indicated. The drive may be the internal hard disk "D:", a memory
stick or the flash disk drive "F:".
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
MMEMory Subsystem
6.143