R&S ESU Series Operating Manual page 580

R&S ESU
<file_name> selects the file to be transferred.
The binary data block <block> has the following structure:
– it always begins with the character '#',
– followed by a digit for the length of the length information,
– followed by the indicated number of digits as length information (number of bytes) for the binary
data themselves,
– finally the binary data with the indicated number of bytes
Example:
"MMEM:DATA 'TEST01.HCP',#216This is the file"
'means:
'#2: the next 2 characters are the length indication
'16: number of subsequent binary data bytes
'This is the file: 16 bytes stored as binary data in the file TEST01.HCP.
"MMEM:DATA? 'TEST01.HCP'"
'Transfers the file TEST01.HCP from the instrument to the control computer.
Characteristics: *RST value: -
SCPI: conform
Mode: R, A
MMEMory:DELete <file_name>
This command deletes the indicated files.
The indication of the file name contains the path and, optionally, the drive name. Indication of the path
complies with DOS conventions.
Parameter: <file_name> ::= DOS file name
Example:
"MMEM:DEL 'TEST01.HCP'"
'The file TEST01.HCP is deleted.
Characteristics: *RST value: -
SCPI: conform
Mode: R, A
This command is an event and therefore has no *RST value and no query.
MMEMory:DELete:IMMediate <file_name>
This command deletes the indicated files. Any 'read only' labels are ignored.
The indication of the file name contains the path and, optionally, the drive name. Indication of the path
complies with DOS conventions.
Parameter: <file_name> ::= DOS file name
Example:
"MMEM:DEL:IMM 'TEST01.HCP'"
'The file TEST01.HCP is deleted.
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A
This command is an event and therefore has no *RST value and no query.
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
MMEMory Subsystem
6.141