R&S ESU Series Operating Manual page 181

R&S ESU
If MARKER 1 is not active when the softkey is pressed, it is automatically activated
and set to the highest peak in the window.
If an instrument setting is changed after selection of MARKER ZOOM, the function
is aborted.
The MARKER ZOOM softkey is only available in the frequency domain
(span > 0).
Remote command:
ALL MARKER
The ALL MARKER OFF softkey switches off all markers (reference and delta mark-
OFF
ers). It also switches off all functions and displays associated with the markers/delta
markers.
Remote command:
MKR->TRACE
The MKR->TRACE softkey places the active marker on a new trace. The trace is
selected via a data entry field. Only those traces can be selected which are visible
on the screen in the same window.
The function of this softkey is identical to that of the
MKR-> menu (see
Example
Three traces are presented on the screen. The marker is always on trace 1 when
switching on.
[MKR ->TRACE] "2"<ENTER>
[MKR ->TRACE] "3"<ENTER>
Remote command:
LINK MKR1 With the softkey LINK MKR1 AND DELTA1 the delta marker 1 can be linked to
AND DELTA1 marker 1, so if the x-axis value of the marker 1 is changed the delta marker 1 will fol-
low on the same x-position. The link is off by default.
Example for setup
•
•
•
•
•
•
•
Now select the Marker1 (by switching MARKER1 from DELTA back to NORM) and
when changing the x-axis value (by knob wheel or UP/DOWN keys) the delta
marker1 will follow automatically.
4.150
"MKR->TRACE" on page
PRESET
TRACE | MAX HOLD
TRACE | SELECT TRACE | 2 | AVERAGE
MKR (Switches marker1 on)
MARKER NORM DELTA | DELTA (Delta Marker 1 ON)
MKR-> | MKR->TRACE | 2
LINK MKR1 AND DELTA1
CALC:MARK1:FUNC:ZOOM 1kHz
CALC:MARK:AOFF
4.164).
The marker jumps to trace 2 but remains on the
previous frequency or time.
The marker jumps to trace 3. '
CALC:MARK1:TRAC 1
CALC:DELT:TRAC 1
Operating Manual 1302.6163.12 - 03
Instrument Functions
Analyzer Mode
MKR->TRACE softkey in the