Rsib Interface Functions; Overview Of Interface Functions - R&S ESU Series Operating Manual

R&S ESU

4.14 RSIB Interface Functions

This section lists all functions of the DLL "RSIB.DLL" or "RSIB32.DLL" or
"librsib.so", which allow control applications to be produced.
4.14.1

Overview of Interface Functions

The library functions are adapted to the interface functions of National Instruments
for GPIB programming. The functions supported by the libraries are listed in the fol-
lowing table.
Function
RSDLLibfind()
RSDLLibwrt()
RSDLLilwrt()
RSDLLibwrtf()
RSDLLibrd()
RSDLLilrd()
RSDLLibrdf()
RSDLLibtmo()
RSDLLibsre()
RSDLLibloc()
RSDLLibeot()
RSDLLibrsp()
RSDLLibonl()
RSDLLTestSRQ()
RSDLLWaitSrq()
RSDLLSwapBytes
4.356
Description
Provides a handle for access to a device.
Sends a zero-terminated string to a device.
Sends a certain number of bytes to a device.
Sends the contents of a file to a device.
Reads data from a device into a string.
Reads a certain number of bytes from a device.
Reads data from a device into a file.
Sets time-out for RSIB functions.
Switches a device to the local or remote state.
Temporarily switches a device to the local state.
Enables/disables the END message for write operations.
Performs a serial poll and provides the status byte.
Sets the device online/offline.
Checks whether a device has generated an SRQ.
Waits until a device generates an SRQ.
Swaps the byte sequence for binary numeric display (only
required for non-Intel platforms).
Operating Manual 1302.6163.12 - 03
Instrument Functions
RSIB Interface Functions