R&S ESU Series Operating Manual page 190

R&S ESU
NEW SEARCH The NEW SEARCH softkey starts a new peak search and enters the results in the
peak list.
Remote command:
SORT MODE The SORT MODE FREQ/LEVEL softkey defines the position of the peak values in
FREQ | LEVEL the list:
• FREQ: sorting in ascending order of frequency values (time values if span = 0)
• LEVEL: sorting according to level
Remote command:
PEAK With level measurements, the PEAK EXCURSION softkey allows the minimum
EXCURSION amount to be entered by which a signal must decrease or increase in order to be
recognized as a maximum by the peak search function.
Values between 0 dB and 80 dB may be entered, the resolution being 0.1 dB
Remote command:
LEFT LIMIT | The LEFT LIMIT and RIGHT LIMIT softkeys define the vertical lines F1/F2 in the fre-
RIGHT LIMIT quency domain (span > 0) and T1/T2 in the time domain (span = 0) between which
the search is carried out.
If only one line is active, the F1/T1 line is used as the lower limit; the upper limit is
the stop frequency. If F2/T2 is also active, it defines the upper limit.
Remote command:
THRESHOLD The THRESHOLD softkey defines a horizontal threshold line which represents the
lower limit of the peak search level range.
Remote command:
PEAK LIST OFF The PEAK LIST OFF softkey switches off the table with the search results.
Remote command:
PEAK LIST The PEAK LIST EXPORT softkey stores the content of the marker peak list in ASCII
EXPORT format to the specified file. The format of the decimal point is defined by the DECIM
SEP softkey.
Remote command:
DECIM SEP The DECIM SEP softkey selects the decimal separator between '.' (decimal point)
and ',' (comma) for the function PEAK LIST EXPORT.
Operating Manual 1302.6163.12 - 03
INIT;*WAI;
CALC:MARK:FUNC:FPE 10;
CALC:MARK:FUNC:FPE:COUN?;
CALC:MARK:FUNC:FPE:Y?;
CALC:MARK:FUNC:FPE:X?
CALC:MARK:FUNC:FPE:SORT X;
CALC:MARK:PEXC 6dB
CALC:MARK:X:SLIM:LEFT 1MHZ
CALC:MARK:X:SLIM:RIGH 10MHZ
CALC:MARK:X:SLIM ON
CALC:THR -20dBm
CALC:THR ON
--
MMEM:STOR:PEAK 'C:\filename.txt'
Instrument Functions
Analyzer Mode
4.159