R&S ESU Series Operating Manual page 763

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 36 of 47)
R&S FSE [SENSe<1|2>:]FREQuency:CENTer
ESU
FSE [SENSe<1|2>:]FREQuency:CENTer:LINK
R&S FSE [SENSe<1|2>:]FREQuency:CENTer:STEP
ESU
R&S FSE [SENSe<1|2>:]FREQuency:CENTer:STEP:LINK
ESU
R&S FSE [SENSe<1|2>:]FREQuency:CENTer:STEP:LINK:
ESU FACTor
R&S FSE [SENSe<1|2>:]FREQuency:MODE
ESU
R&S FSE [SENSe<1|2>:]FREQuency:OFFSet
ESU
FSET [SENSe<1|2>:]FREQuency:RANGe
R&S FSE [SENSe<1|2>:]FREQuency:SPAN
ESU
R&S FSE [SENSe<1|2>:]FREQuency:SPAN:FULL
ESU
FSE [SENSe<1|2>:]FREQuency:SPAN:LINK
R&S FSE [SENSe<1|2>:]FREQuency:STARt
ESU
FSET [SENSe<1|2>:]FREQuency:STARt:FLINe[:STATe]
FSE [SENSe<1|2>:]FREQuency:STARt:LINK
R&S FSE [SENSe<1|2>:]FREQuency:STOP
ESU
FSET [SENSe<1|2>:]FREQuency:STOP:FLINe[:STATe]
FSE [SENSe<1|2>:]FREQuency:STOP:LINK
FSET/ [SENSe<1|2>:]FREQuency[:CW|:FIXed]
ESIB
FSET/ [SENSe<1|2>:]FREQuency[:CW|:FIXed]:STEP
ESIB
R&S [SENSe<1|2>:]LIST:POWer:RESult?
ESU
6.324
Remote Control – Description of Commands
Parameter Notes
0 to f frequency ranges are
max
different for R&S ESU
and FSE
STARt | STOP | SPAN not available for
R&S ESU
0 to f frequency ranges are
max
different for R&S ESU
and FSE
SPAN | RBW | OFF
1 to 100 PCT
CW|FIXed | SWEep
<numeric_value>
2 GHz | 22 GHz not available for
R&S ESU
0 to f frequency ranges are
max
different for R&S ESU
and FSE
CENTer | STOP | SPAN not available for
R&S ESU
0 to f frequency ranges are
max
different for R&S ESU
and FSE
ON | OFF not available for
R&S ESU. Replaced by
CALC:MARK:FUNC:
SLIMits
CENTer | STOP | SPAN not available for
R&S ESU
0 to f frequency ranges are
max
different for R&S ESU
and FSE
ON | OFF not available for
R&S ESU; replaced by
CALC:MARK:FUNC:
SLIMits.
CENTer | STARt | SPAN not available for
R&S ESU
f to f not available for
min max
R&S ESU
f to f not available for
min max
R&S ESU
new function for
R&S ESU
Operating Manual 1302.6163.12 - 03