R&S ESU Series Operating Manual page 313

R&S ESU
This softkey is only available, if a HP languge is selected via the
softkey.
Remote command:
COUPLING The COUPLING FSP/HP softkey controls the default coupling ratios for:
FSP/HP
•
•
for the HP emulation mode.
In case of FSP the standard parameter coupling of the instrument is used. As a
result in most cases a shorter sweeptime is used than in case of HP.
The softkey is only available in HP emulation mode.
Remote command:
User Port Configuration
The instrument provides a parallel interface, which is 8 bits wide. Over these ports,
arbitrary bit patterns can be output or input.
USER PORT
USER PORT IN/OUT
PORT 0 0/1 to PORT 7 0/1
The USER PORT softkey opens the submenu for setting the direction of the data
transmission and for entering the values of the individual ports.
USER PORT IN/ The USER PORT IN/OUT determines in which direction the interface transmits data.
OUT
USER PORT (read operation)
The value is indicated in a window. A new readout is started by pressing READ.
Pressing OK closes the window
USER PORT INPUT
Remote command:
USER PORT OUT (write operation)
The bit pattern selected with softkeys PORT 0 to PORT 7 is output.
Remote command:
PORT 0 0/1 to The PORT 0 0/1 to PORT 7 0/1 softkeys determine the output value for port 1 to 7.
PORT 7 0/1 These softkeys are only available for setting USER PORT OUT.
Remote command:
4.282
span and resolution bandwidth (Span/RBW) and
resolution bandwidth and video bandwidth (RBW/VBW)
00000000
OK
READ
SYST:RSW ON
SYST:HPC FSP
INP:UPOR:STAT ON
INP:UPOR?
OUTP:UPOR:STAT ON
OUTP:UPOR STAT ON
OUTP:UPOR #B10110010
Operating Manual 1302.6163.12 - 03
Instrument Functions
Basic Settings
GPIB LANGUAGE