R&S ESU Series Operating Manual page 658

R&S ESU
[SENSe<1|2>:]SWEep:SPACing LINear | LOGarithmic | AUTO
In receiver mode, this command toggles between linear, logarithmic sand automatic linear tep modes.
In receiver mode this setting does not influence the display of the frequency axis.
In analyzer mode, this command toggles between linear and logarithmic sweep. The frequency axis is
set to linear or logarithmic scaling accordingly.
Example:
"SWE:SPAC LOG"
Characteristics: *RST value: LIN
SCPI: conform
Mode: R, A
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
SENSe Subsystem
6.219