R&S ESU Series Operating Manual page 838

R&S ESU
Error code
-253
-254
-255
-256
-257
-258
-260
Error code
-300
-310
-313
-330
-350
Operating Manual 1302.6163.12 - 03
Error text in the case of queue poll
Error explanation
Corrupt media
The media is corrupt.
Example: The memory stick has a defect.
Media full
The media is full.
Example: There is no space on the memory stick.
Directory full
The media directory is full.
File name not found
The file name cannot be found on the media.
File name error
The file name is wrong.
Example: An attempt is made to copy to a duplicate file name.
Media protected
The media is protected.
Example: The write-protect tab on the memory stick is activated.
Expression error
The expression contains an error.
Error text in the case of queue poll
Error explanation
Device-specific error
R&S ESU-specific error not defined in greater detail.
System error
This error message suggests an error within the instrument. Please inform the R&S
Service.
Calibration memory lost
Loss of the non-volatile data stored using the *CAL? command. This error occurs
when the correction data recording has failed.
Selftest failed
The selftest could not be executed.
Queue overflow
This error code is entered in the queue instead of the actual error code if the queue is
full. It indicates that an error has occurred but not been accepted. The queue can
accept 5 entries.
Error Messages
SCPI-Specific Error Messages
9.7