R&S ESU Series Operating Manual page 104

R&S ESU
DETECTOR The DETECTOR softkey opens a submenu to select the detector.
The detector type is set for the trace scan and may be independently selected for
each trace.
For description of detector types see section
MAX PEAK The MAX PEAK softkey activates the max peak detector.
Remote command:
MIN PEAK The MIN PEAK softkey activates the min peak detector.
Remote command:
QUASIPEAK The QUASIPEAK softkey selects the quasipeak detector.
The IF bandwidth is adapted as a function of the frequency range. The coupling of
the IF bandwidth to the frequency range can be cancelled using softkey CISPR
RBW UNCOUPLED.
Remote command:
AVERAGE The AVERAGE softkey activates the average detector.
Remote command:
RMS The RMS softkey activates the rms detector.
Remote command:
FINAL The FINAL MAX PEAK selects the max peak detector for the final measurement.
MAX PEAK
Remote command:
FINAL The FINAL MIN PEAK selects the min peak detector for the final measurement.
MIN PEAK
Remote command:
FINAL The FINAL QUASIPEAK selects the quasipeak detector for the final measurement.
QUASIPEAK
Remote command:
FINAL The FINAL AVERAGE selects the average detector for the final measurement.
AVERAGE
Remote command:
FINAL The FINAL CISPR AV selects the weighting average detector according to CISPR
CISPR AV 16-1 for the final measurement.
Remote command:
FINAL The FINAL RMS selects the rms detector for the final measurement.
RMS
Remote command:
Operating Manual 1302.6163.12 - 03
"Selection of Detector" on page
DET POS
DET NEG
DET QPE
DET AVER
:DET RMS
:DET:FME POS
:DET:FME NEG
:DET:FME QPE
:DET:FME AVER
:DET:FME CAV
:DET:FME RMS
Instrument Functions
Receiver Mode
4.137.
4.73