R&S ESU Series Operating Manual page 348

R&S ESU
Remote command:
NEW The NEW softkey creates a new test report. The Edit Header dialog is displayed and
the contents of the header can be edited. After pressing OK the report is created.
If a previously created test report has not been printed or exported into a file, the fol-
lowing message is displayed: Previous Report Will Be Lost.
Remote command:
APPEND The APPEND softkey appends a test report to the existing report. The Edit Header
dialog is displayed and the contents of the header can be edited. It is possible to cre-
ate reports that contain the results of several measurements. The report is stored in
internal memory until it is printed.
Remote command:
PRINT The PRINT softkey prints or exports the previously created test report.
Remote command:
PREVIEW With the PREVIEW softkey, the test report can be checked before printing.
Operating Manual 1302.6163.12 - 03
HCOP:TREP:ITEM:HEAD:LINE2:TEXT 'radiated
test'
HCOP:TREP:NEW
HCOP:TREP:APP
HCOP:TREP:APP
Instrument Functions
Basic Settings
4.317