Valve, Spring, And Valve Seal Removal - Honda Accord 2008 Manual

07/11/02 09:23:12 61TA0000_060_0038
Cylinder Head

Valve, Spring, and Valve Seal Removal

Special Tools Required
Valve spring compressor attachment 07757-PJ1010A
Identify the valves and valve springs as they are
removed so that each item can be reinstalled in its
original position.
1. Remove the cylinder head (see page 6-27).
2. Using an appropriate-sized socket (A) and plastic
mallet (B), lightly tap the spring retainer to loosen
the valve cotters.
＊０１
3. Install the valve spring compressor and the
attachment. Compress the spring, and remove the
valve cotters.
＊０２
4. Remove the valve spring compressor and the
attachment, then remove the spring retainer and
the valve spring.
6-38
B
A
07757-PJ1010A
5. Install the valve guide seal remover.
6. Remove the valve seal.
ＴＡ０８ＡＥＩＡ１４６８０２０００００ＫＡＡＴ００
＊０３
＊０４