Rocker Arm/Shaft; Push Rod; Cam Follower - Honda MUV700 big red Service Manual

CYLINDER HEADIVALVE/CAMSHAFT
Mark all the parts
so they can be
placed back
In
rhelr
Oflgma/loc8l!ons
9-8
Remove the following :
- rocker arm shafts
- rocker arms
- wave washers
INSPECTION
ROCKER ARM / SHAFT
Check the rocker arms and shafts for wear or dam-
age.
If the rocker arm follower is worn or damaged,
check the push rod and oil passages.
Measure each rocker arm shaft 0.0.
SERVICE LIMIT: 11.92
mm
(0.469
in)
Measure each rocker arm 1.0.
SERVICE LIMIT:
12.05 mm (0.474 in)
Subtract each rocker arm shaft 0.0. from the corre-
sponding rocker arm 1.0. to obtain the rocker arrn-
to-shaft clearance.
SERVICE LIMIT: 0.08 mm (0.003 in)
PUSH ROO
Check the push rods for wea r or damage.
If the push rod is worn or damaged, check the cam
follower and camshaft .
CAM FOLLOWER
Check the cam fo llower and follower bore in the cyl-
inder head fo r scoring, scratches o r damage.
Measure each follower
0 .0.
SERVICE LIMIT: 22.46 mm (0.884 in)
WAVE WASHERS
ROCKER