Bico Bi/Ci Parameters To De-Activated Drive Objects; Bico Bo/Co Parameters To De-Activated Drive Objects; Actual Topology Number Of Indices / Act Topo Indices - Siemens SINAMICS DCM List Manual

2 Parameters
2.2 List of parameters
Dependency: Refer to: p9495, p9497, p9498, p9499
Note: The BI/CI parameters involved are listed in p9498[0...29] (signal sink).
The associated BO/CO parameters are listed in p9499[0...29] (signal source).
After p9496 = 1, 2 the following applies:
- p9497 = 0
- p9496 = 0
p9497 BICO interconnections to de-activated drive objects number / Interconn obj qty
All objects Can be changed: T
Data type: Unsigned16
P-Group: Commands
Not for motor type: -
Min
0
Description: Displays the number of saved BICO interconnections to drive objects that are either not capable of operation or have
been deactivated.
BO/CO parameters are on the drive object that is either not capable of operation or has been deactivated (signal
source).
Dependency: Refer to: p9495, p9496, p9498, p9499
p9498[0...29] BICO BI/CI parameters to de-activated drive objects / BI/CI to deact obj
All objects Can be changed: T
Data type: Unsigned32
P-Group: Commands
Not for motor type: -
Min
-
Description: Displays the saved BI/CI parameters (signal sink), whose source is located on drive objects that are either not
capable of operation or have been deactivated.
Dependency: Refer to: p9495, p9496, p9497, p9499
Note: A BICO interconnection (signal sink, signal source) is displayed in the same index of p9498 and p9499.
p9499[0...29] BICO BO/CO parameters to de-activated drive objects / BO/CO to deact obj
All objects Can be changed: T
Data type: Unsigned32
P-Group: Commands
Not for motor type: -
Min
-
Description: Displays the saved BO/CO parameters (signal source), which are located on drive objects that are either not capable
of operation or have been deactivated.
Dependency: Refer to: p9495, p9496, p9497, p9498
Note: A BICO interconnection (signal sink, signal source) is displayed in the same index of p9498 and p9499.
r9900

Actual topology number of indices / Act topo indices

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Unsigned16
CU_DC_S
P-Group: Topology
Not for motor type: -
Min
-
Description: Displays the number of indices of the actual topology.
Dependency: Refer to: r9901
358
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
65535
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
SINAMICS DCM