Symbolic Assignment Of I/O Variables (Profidrive Message Frame / Drive Parameters); Symbolic Assignment Of I/O Variables To The Profidrive Message Frame Of The To Axis; Symbolic Assignment Of I/O Variables To Drive Parameters - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Commissioning (software)

7.11 Symbolic assignment of I/O variables (PROFIdrive message frame / drive parameters)

7.11 Symbolic assignment of I/O variables (PROFIdrive message frame /
drive parameters)
7.11.1 Symbolic assignment of I/O variables to the PROFIdrive message frame of the
TO axis
You can assign I/O variables from the address list which you require for display and diagnostic
purposes, for example, to individual components (status word, for example) of the PROFIdrive
message frame using the assignment dialog. Only components suitable for the data type of
the I/O variable are displayed. If no data type is specified at the I/O variable, this is determined
via the assignment partner after the selection.
Figure 7-55
7.11.2

Symbolic assignment of I/O variables to drive parameters

I/O variables from the address list can be assigned to drive parameters using the assignment
dialog. Only parameters suitable for the data type of the I/O variable are displayed. If no data
type is specified at the I/O variable, this is determined by the parameter selection.
An extension of the standard message frame is created automatically for the transfer of the
parameters to/from the drive.
278
Assignment of I/O variables to the PROFIdrive message frame
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2