Overview Of Parameters; Explanation Of The List Of Parameters; Basic Structure Of The Parameter Descriptions - Siemens SINAMICS DCM List Manual

2 Parameters

2.1 Overview of parameters

2.1 Overview of parameters
2.1.1

Explanation of the list of parameters

Basic structure of the parameter descriptions

The data in the following example have been chosen at random. The description of a
parameter includes as a maximum, the information listed below. Some of the information is
optional.
The "List of parameters" (Page 28) has the following structure:
- - - - - - - - - - - - Start of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
pxxxx[0...n] BICO: Full parameter name / abbreviated name
Drive object Can be changed: C1(x), C2(x), U, T
(function module)
Data type: Unsigned32 / Integer16
P-Group: Closed-loop control
Not for motor type: ASM
Min
0.00 [Nm]
Description: Text
Value: 0:
1:
2:
etc.
Recommendation: Text
Index: [0] = Name and meaning of index 0
[1] = Name and meaning of index 1
[2] = Name and meaning of index 2
etc.
Bit field: Bit
00
01
02
Dependency: Text
Refer to: pxxxx, rxxxx
Refer to: Fxxxxx, Axxxxx
Danger: Warning:
Notice:
Note: Information that might be useful.
- - - - - - - - - - - - End of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The individual pieces of information are described in detail below.
14
Name and meaning of value 0
Name and meaning of value 1
Name and meaning of value 2
Signal name
Name and meaning of bit 0
Name and meaning of bit 1
Name and meaning of bit 2
etc.
Caution:
Calculated: CALC_MOD_REG
Dyn. index: CDS, p0170
Unit group: 7_1
Scaling: p2000
Max
10.00 [Nm]
1 signal
Yes
Yes
Yes
Safety notices with a warning triangle
Safety notice without a warning triangle
List Manual (LH8), 02/2015, 6RX1800-0ED76
Access level: 2
Func. diagram: 8070
Unit selection: p0505
Expert list: 1
Factory setting
0.00 [Nm]
0 signal
no
no
no
SINAMICS DCM
FP
8060
8065