Co: Oscillation Output After Selection / Oscil Outp Aft Sel; Co: Fixed Setpoint Output After Selection / Fix Set Outp; Co: Rfg Positive Limiting Inverted After Rfg / Rfg Pos Lim Inv; Co: Fixed Setpoint Output After Aop30 / Fix Set Outp Aop - Siemens SINAMICS DCM List Manual

r52208

CO: Oscillation output after selection / Oscil outp aft sel

DC_CTRL Can be changed: -
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
- [%]
Description: Display and connector output of the setpoint dependent upon oscillation selection.
Note: If oscillation is selected (p50485 = 1 signal):
r52208 = r52203
If oscillation is de-selected (p50485 = 0 signal):
r52208 = p50484
r52209

CO: Fixed setpoint output after selection / Fix set outp

DC_CTRL Can be changed: -
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
- [%]
Description: Display and connector output of the sum of all fixed setpoints following selection of at least one connector.
Dependency: Refer to: p50430, p50431
Note: If at least one connector has been selected via p50430[0 to 7]:
r52209 = r52204
If no connectors have been selected via p50430[0 to 7]:
r52209 = r52210
r52210[0...3]

CO: RFG positive limiting inverted after RFG / RFG pos lim inv

DC_CTRL Can be changed: -
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
- [%]
Description: Display and connector output for the signals interconnected and inverted via connector input p50632[0 to 3].
Index: [0] = Signal p50632[0] inverted
[1] = Signal p50632[1] inverted
[2] = Signal p50632[2] inverted
[3] = Signal p50632[3] inverted
r52211

CO: Fixed setpoint output after AOP30 / Fix set outp AOP

DC_CTRL Can be changed: -
Data type: FloatingPoint32
P-Group: -
Not for motor type: -
Min
- [%]
Description: Display and connector output for the fixed setpoint after intervention from the advanced operator panel 30 (AOP30).
Dependency: Refer to: p50433
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
- [%]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
- [%]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
- [%]
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
- [%]
2 Parameters
2.2 List of parameters
Access level: 1
Func. diagram: 3120
Unit selection: -
Expert list: 1
Factory setting
- [%]
Access level: 1
Func. diagram: 3115
Unit selection: -
Expert list: 1
Factory setting
- [%]
Access level: 2
Func. diagram: 3155
Unit selection: -
Expert list: 1
Factory setting
- [%]
Access level: 1
Func. diagram: 3113
Unit selection: -
Expert list: 1
Factory setting
- [%]
585