Siemens SINAMICS DCM List Manual page 867

Cause:
Description of the possible causes of the fault/alarm. A fault or alarm value can also be
specified (optional).
Fault value (r0949, format):
The fault value is entered in the fault buffer in r0949[0...63] and specifies additional, more
precise information about a fault.
Alarm value (r2124, format):
The alarm value specifies additional, more precise information about an alarm.
The alarm value is entered in the alarm buffer in r2124[0...7] and specifies additional, more
precise information about an alarm.
Remedy:
Description of the methods available for removing the cause of the active fault or alarm.
In certain cases, servicing and maintenance personnel are responsible for choosing a
suitable method to remove the fault cause.
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
WARNING
4 Faults and alarms
4.1 Overview of faults and alarms
867