Measuring Function Status / Meas Fct Status; Measurement Function Configuration / Meas Fct Config; Trace Memory Space Required / Trace Mem Required - Siemens SINAMICS DCM List Manual

Value: 0:
1:
2:
3:
4:
Index: [0] = Trace 0
[1] = Trace 1
r4706

Measuring function status / Meas fct status

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Integer16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Displays the actual status of the measuring function.
Value: 0:
1:
2:
3:
4:
5:
p4707

Measurement function configuration / Meas fct config

CU_DC, CU_DC_R, Can be changed: U, T
CU_DC_R_S,
Data type: Integer16
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
0
Description: Setting to configure the measurement function.
Value: 0:
1:
Dependency: The parameter cannot be changed when the measurement function has been started (r4706 = 2, 3).
Note: This parameter involves the free measuring functions and is only active for p4810=6.
For value = 0:
The free measuring function is parameterized with master control.
For value = 1:
The free measuring function is parameterized without master control.
r4708[0...1]

Trace memory space required / Trace mem required

CU_DC, CU_DC_R, Can be changed: -
CU_DC_R_S,
Data type: Unsigned32
CU_DC_S
P-Group: Trace and function generator
Not for motor type: -
Min
-
Description: Displays the required memory in bytes for the actual parameterization.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Refer to: r4799
SINAMICS DCM
List Manual (LH8), 02/2015, 6RX1800-0ED76
Trace inactive
Trace is recording presamples
Trace is waiting for trigger event
Trace is recording
Recording (trace) ended
Measurement function inactive
Measuring function parameterization checked
Measuring function waits for stabilizing time
Measuring function recording (tracing)
Measuring function trace ended with error
Measuring function trace successfully completed
Standard
Free meas fct
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
5
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
1
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
257