Installing Driveline Guard - MacDon CA20 Service Manual

2.3 Installing Driveline Guard

1. Slide the guard onto the replacement driveline, and line up
the slotted lug on the locking ring (A) with the arrow (B) on
the guard.
2. Push the guard onto the ring until the locking ring is visible
in the slots (A).
3. Use a slotted screwdriver to rotate ring (A) clockwise and
lock ring in guard.
214923
INSTALLATION INSTRUCTIONS
B
Figure 2.8: Driveline Guard
Figure 2.9: Driveline Guard
Figure 2.10: Driveline Guard
9
A
A
A
Revision A