Storing The Tow-Bar - MacDon D65 Operator's Manual

Storing the Tow-Bar

1. Place the inner end of the outer half of the tow-bar into
the cradle (A) on the left side of the header backtube.
2. Secure clevis/pintle end of the tow-bar in support (B) on
the endsheet using hitch pin (C). Secure with lynch pin.
3. Install the rubber strap (D) on the cradle (A).
4. Place the inner end of the outer half of the tow-bar into
the cradle (A) on the right side of the header backtube.
5. Secure the tube end of the tow-bar in support (B) on
the endsheet using hitch pin (C). Secure with hairpin.
6. Install the rubber strap (D) on the cradle (A).
147725
OPERATION
Figure 3.75: Tow-Bar Storage – Left Side
Figure 3.76: Tow-Bar Storage – Right Side
91
Revision A