Storing Tow-Bar - MacDon D65 Operator's Manual

5. Remove clevis pin
later installation.
6. Push latch (B) and lift tow-bar (C) from hook.
Release latch.

Storing Tow-Bar

Store tow-bar as follows:
1. On the LH side of the header, place the inner end
of the outer half of the tow-bar in cradle (A) on
header backtube.
2. For clevis or pintle end of tow-bar, secure in support (B)
on endsheet with hitch pin (C). Secure with lynch pin.
3. Install rubber strap (D) on cradle (A).
169594
OPERATION
(A) and set aside for
Figure 4.73
A - Clevis pin
C - Tow-bar
Figure 4.74
A - Cradle
C - Hitch pin
91
B - Latch
B - Support
D - Rubber strap
Rev. C