Set System Time; Configuration - Planet IP DSLAM IDL-2400 User Manual

4.1.5 Set System Time

IDL series support SNTP (Simple Network Time Protocol), used to synchronize its clocks in
the Internet. IP DSLAM will get the system time via SNTP server while a SNTP sever is
created.

4.1.5.1 Configuration

Follow the steps below to set the SNTP server.
Note:
System time will lost while the system is powered off.
Step 1:
Set the IP DSLAM as the SNTP client
$create sntp?
Command
------- -----------
servaddr SNTP Server address
$create sntp servaddr 192.168.100.253
Entry Created
Server Addr : 192.168.100.253 Status : active
Step 2:
Enable SNTP client
$modify sntp cfg enable
Status : Disable
Set Done
Status : Enable
$
IP DSLAM
Description
87