Filter Subrule Igmp Commands; Get Filter Subrule Igmp; Create Filter Subrule Igmp - Planet IP DSLAM IDL-2400 User Manual

Output field:
Field
Rule Id
Subrule Id
Icmp type
Icmp code
ICMP type comparison
ICMP code comparison
Subrule Priority
Transport Header
References:
Generic Filter commands

5.13.31 Filter subrule IGMP Commands

5.13.31.1 Get Filter subrule igmp

Description:
Use this command to get.
Command Syntax:
get filter subrule igmp [ruleid <ruleid-val>] [subruleid <subruleid-val>]

5.13.31.2 Create filter subrule igmp

Description:
Use this command to create.
IP DSLAM
Description
Unique identifier of a filter rule of which this sub rule is being
created
Unique identifier of a filter subrule
ICMP type
ICMP code
ICMP type comparison type
ICMP code comparison type
This specifies the priority of the subrule. Based on
this priority value, the subrule is created in fast or
slow memory. In case priority is specified as 'asinrule', subrule
priority will be same as specified in the
rule.
This specifies the type of the transport header in the packet in
which the corresponding IP is being transported. If the value of
this field is ethernet, then the IP is being carried in the ethernet
header. If it is 'pppoe', then the corresponding IP is being carried
in the PPP header.
425