Table of Contents
Advertisement
Instance Id
Cautions:
An entry in this table shall not be applicable for a bridge port created over
PPPOE and IPOE interface.
5.21.5 Rl actionprofile info Commands
5.21.5.1 Get rl actionprofile info
Description:
Use this command to get.
Command Syntax:
get rl actionprofile info [profileid <profileid-val>] [result conform | exceed |
violate] [action drop | allow | sendtocontrol | copytocontrol | modifytos |
setbaclevel]
5.21.5.2 Create rl actionprofile info
Description:
Use this command to create.
Command Syntax:
create rl actionprofile info profileid <profileid-val> result conform | exceed |
violate action drop | allow | sendtocontrol | copytocontrol | modifytos | setbaclevel
[actionval <actionval-val>] [actionmask <actionmask-val>] [description
<description-val>]
5.21.5.3 Delete rl actionprofile info
Description:
Use this command to delete.
Command Syntax:
get rl actionprofile info profileid <profileid-val>result conform | exceed | violate
action drop | allow | sendtocontrol | copytocontrol | modifytos | setbaclevel
542
other user defined flows are identified by filtering rules by
associating flow type with a rule action of type 'ratelimiter'.
This field identifies the Rate limiting instance.
IDL series User Guide
Advertisement
Table of Contents
