Table of Contents
Advertisement
Application
Description
5.21.6 Rl instance info Commands
5.21.6.1 Get rl instance info
Description:
Use this command to get.
Command Syntax:
get rl instance info [instanceid <instanceid-val>]
5.21.6.2 Create rl instance info
Description:
Use this command to create.
Command Syntax:
create rl instance info instanceid <instanceid-val> profileid <profileid-val>
actionprofileid <actionprofileid-val>
5.21.6.3 Delete rl instance info
Description:
Use this command to delete.
546
contain trap disabled (0xffffffff) or trap enabled
(0x00000000). Other values are invalid for this
action.Only lower 8-bits are taken into
consideration for modifytos action and other bits
are ignored. In the mask if a bit location contains 1,
then the corresponding bit in the TOS field is
overwritten with the corresponding bit in action
value. In the mask if a bit location contains 0, then
the corresponding bit in the TOS field remains
unchanged.
Description of the application that receives packets
matching this RL. This field is mandatory if Action
is 'sendtocontrol' or 'copytocontrol'.The description
string should not begin with underscore '_' as it is
reserved for special usage e.g.
_PPPOE_CONTROL.
IDL series User Guide
Advertisement
Table of Contents
