Planet IP DSLAM IDL-2400 User Manual page 413

servicepriotagfrom
<servicepriotagfrom-val>
servicepriotagto
<servicepriotagto-val>
servicevlanidcmp eq |
neq| lt | leq | gt | geq |
any| inrange | exrange
servicepriotagcmp eq |
neq| lt | leq | gt | geq |
any| inrange | exrange
Example:
$ create filter subrule ether ruleid 1 subruleid 2 srcmacaddrfrom 00:01:02:03:04:05
srcmacaddrto 00:01:02:03:04:10 dstmacaddrfrom 00:02:03:04:05:11
dstmacaddrto 00:02:03:04:05:15 ethertypefrom 0x0800 ethertypeto 0x0810
vlanidfrom 2 vlanidto 5 priotagfrom 2 priotagto 5 dsapfrom 0xf0 dsapto 0xff
ssapfrom 0xf0 ssapto 0xff srcmacaddrcmp inrange dstmacaddrcmp exrange
IP DSLAM
Modify － Optional
Valid values: 1 - 4094
Default value: 4094
Start service priority tag of the range of priority tags. Invalid, if the direction
of the rule for which this subrule is being created is 'out'. This field is invalid
if 'etherhPrioTagCmpType' is 'any'(7). This field and the etherPriorityTagTo
field specify a range of priority tags, if 'etherhPrioTagCmpType' is either
'inrange'(8) or 'exrange'(9).In native mode configuring this parameter will
result in error. Type: Create － Optional
Modify － Optional
Valid values: 0 - 7
Default value: 0
End service priority tag of the range of priority tags. Invalid, if the direction
of the rule for which this subrule is being created is 'out'. This field and the
etherhPriorityTagFrom field specify a range of service priority tags, if
'etherhServicePrioTagCmpType' is either 'inrange'(8) or 'exrange'(9).
Otherwise this field is invalid. In native mode configuring this parameter will
result in error.
Type: Create － Optional
Modify － Optional
Valid values: 0 - 7
Default value: 7
Service VLAN Id comparison type. This field must be 'any (7)', if
etherhPrioTagCmpType is not equal to 'any (7)'In native mode configuring
this parameter will result in error.
Type: Create － Optional
Modify － Optional
Default value: any
Service Priority tag comparison type.This field must be 'any (7)', if
vlanidcmp is not equal to 'any (7)'.In native mode configuring this
parameter will result in error.
Type: Create － Optional
Modify － Optional
Default value: any
413