Planet IP DSLAM IDL-2400 User Manual page 639

flow<trace-flow>
level <trace-level>
syslog|net|stdout
dest<ip-address>
port <port-number>
Mode:
Super-User
Example:
$ modify trace cfg module GAG flow 0x1 level 0x1
Output :
Verbose Mode On
Module Flow
------------------------------------------------------------------------
GAG 0x0
Set Done
Module Flow
------------------------------------------------------------------------
GAG 0x1
IP DSLAM
GVRP, LACP
This indicates a Hexadecimal bitmask, which sets the filter
for trace flow.
Type : Optional
Valid values: 0x0 to 0xffffffff
This indicates a Hexadecimal bitmask, which sets the filter
for trace level.
Type : Optional
Valid values: 0x0 to 0xffffffff
This specifies the type of logging to be done. Incase net or
syslog is specified then dest and port must be specified.
Type: Optional
This specifies the IP address for host for logging for trace
type syslog and net. It is invalid incase of trace type stdout
Type: Mandatory when type is modified to net or syslog;
else it is invalid
Valid values: Any valid class A/B/C IP address
Port number on which, host is listening for trace info to be
logged incase of trace type syslog and net. It is invalid
incase of trace type stdout
Type: Mandatory when type is modified to net or syslog;
else it is invalid
Valid values: 0-4294967295
Level Type
0x0 Stdout
Level Type
0x1 Stdout
Destn Port
0.0.0.0 0
Destn Port
0.0.0.0 0
639