Table of Contents
Advertisement
TotalMemFree
MemAllocFailCount
MemFreeFailCount
MPoolType
Threshold
Threshold Count
LastMemAllocTime
LastMemFreeTime
LastMemAllocFailTime
LastMemFreeFailTime
ThresholdHitTime
5.22.3.2 Get rmon mpool threshold
Description:
Use this command to get the critical events logged for the memory pool. This
command will display 20 entries (maximum) .Events are logged for the memory
pool for the following 3 cases:
Mem Pool Allocation Fail.
Mem Pool Deallocation Fail.
Threshold Hit.
570
memory pool (since its creation ). This is a
running counter, it always increments never
decrements.
Total number of partitions that has been freed
into the memory pool (since its creation). This is
a running counter, it always increments never
decrements.
The number of times partition allocation from this
pool has failed.
The number of times the partition deallocation to
the pool has failed.
Type of the pool. If the value is DYNAMIC , the
memory pool is of variable size . If it is
PARTITION, it is fixed type memory pool.
Threshold Value set for the memory pool, in
number of bytes.
Number of times the threshold value has been hit
for this memory pool.
The last system time when a partition has been
allocated from the pool.
The last system time when a partition has been
freed into the pool.
The last system time when the partition
allocation from the pool has failed.
The last system time when the partition
deallocation has failed.
The last system time when threshold of the pool
has hit.
IDL series User Guide
Advertisement
Table of Contents
