Table of Contents
Advertisement
Stage Id
Rule Id
Order Id
5.13.23 Filter rule stats Commands
5.13.23.1 Get Filter rule stats
Description:
Use this command to get.
Command Syntax:
get filter rule stats [ruleid <ruleid-val>]
Parameter:
Name
ruleid <ruleid>
Example:
$ get filter rule stats ruleid 1
Output:
Rule Id : 1
Output field:
Field
Rule Id
Num Hits
References:
Generic Filter Commands
392
interfaces and 'AllCpe' indicates all eoa , all ipoe and pppoe
interfaces. If a bridge port on aggregated interface is created then
this field can not have ifIndex of any specific ethernet interface.
This field specifies the stage on the interface to which the rule in
the mapping belongs
Rule Id of the rule in the mapping
This field indicates the order of the rule in the attached sequence.
The default value for this field will be same as the ruleid of the entry.
Description
Unique identifier of a filter rule
Type: Get -- Optional
Valid values: 1- 65535
Num Hits : 4354
Description
Unique identifier of a filter rule
Number of packets that hit this rule
IDL series User Guide
Advertisement
Table of Contents
