Adsl Atur Traps Commands; Get Adsl Atur Traps - Planet IP DSLAM IDL-2400 User Manual

DMT Bin SNR
Signal Atn(dB/10)
AturDMTBinBits
References:
ADSL commands

5.9.19 ADSL ATUR Traps Commands

5.9.19.1 Get adsl atur traps

Description:
This command is used to get.
Command Syntax:
get adsl atur traps [ifname <interface-name]
Parameters:
Name
ifname
<interface-name>
Example:
$ get adsl atur traps ifname dsl-0
272
downstream QLN (f) values in dB. (Not available for ADSL and
ADSL2plus)
The DELT-related parameter that provides an array of real
downstream SNR (f) values in dB (Not available for ADSL and
ADSL2plus)
DELT-related parameter that provides the downtream signal
attenuation (length = 4 bytes). (Not available for ADSL and
ADSL2plus).
Number of bits per bin for the bin indexed by this element of the
string. The 0th element contains the number of bits for bin 0
through to the 255th element, which contains the number of bits for
bin 255. The range of expected values is from 0 to 15 bits per bin
(256 bytes for Annex A and Annex B, 512 bytes for G.Span/Adsl+,
1024 bytes for G.Span Plus).
Description
The ADSL interface name.
Type : Get – Mandatory
Valid values: dsl-0 – dsl-23
IDL series User Guide