Planet IP DSLAM IDL-2400 User Manual page 517

draaddop82tounicast
disable | enable
Example:
$ create dra instance entry portid 1 vlan 5 profileid 1 status client op82 AddAlways
configsuboption aci acival "[ANI] atm 3/10:100.33" (slot = 3, port = 10, vpi = 100,
vci = 33)" raival "conexant noida" syncratefields ActualDelaydnstrm
op82fromclientact drop learning enable portno 10 draaddop82tounicast enable
Auto
Output:
Verbose Mode On
Entry Created
Port Id
Profile Id
Option82
Config Sub-Option
Agent Circuit Id
100, vci = 33)"
Remote Agent Id
SyncRateInfoField
DRA Act For Op82 From Client : drop
DRA learning
VCI
L2 type
DRA Add Op82 To Unicast
Verbose Mode Off:
Entry Created
Output field:
Field
Port Id
VLAN
Profile Id
IP DSLAM
This field specifies whether Option 82 is to be added to DHCP
Unicast packets or not. If enabled Option 82 will be added to
DHCP Unicast Packets and when disabled, it will not be added.
Type: Create -- Optional
Modify -- Optional
Default value: enable
: 1
: 1
: AddAlways
: aci
: "[ANI] atm 3/10:100.33" (slot = 3, port = 10, vpi =
: "conexant noida"
: ActualDelaydnstrm
: enable
: 33
: Eth
: enable
Description
Bridge Port Identifier
VLAN identifier. In case of stacked mode this is virtual VLAN
DRA profile identifier. This shall be used for this DRA instance
VLAN : 5
DRA status : client
Port No : 10
VPI : 100
Encap Type : Llcmux
517