Table of Contents
Advertisement
level packet | byte
type sr2cm | trtcm
peakrate
peakrate-val>
pbs <pbs-val>
Example:
$ create rl profile info profileid 1 rate 24 mbs 24 level packet type trtcm peakrate 30
pbs 30
550
Level of the rate limiter identifies whether the algorithm
executes in terms of number of packets or number of
bytes.If the 'level' is 'packet'(1), rate is configured in
terms of packets per second and burst size is
configured in terms of number of packets.If the 'level' is
'byte'(2), rate is configured in terms of bits per second
and burst size is configured in terms of number of
bytes.
Type: Create -- Optional
Modify -- Optional
Default value: packet
Type identifies the algorithm for rate limiting.The sr2cm
(single rate two color marker) is a single-rate algorithm.
It takes rate and burst size as input parameters.The
trtcm (two rate three color marker) is a dual-rate
algorithm. It takes two sets of rate and burstsize as
inputs, one each for peak and committed information.
Type: Create -- Optional
Modify -- Optional
Default value: sr2cm
This field is relevant only if 'type' is 'trtcm'(2). This field
defines the peak information rate. If 'level' is 'packet'(1),
the unit is packets per second. If level is byte, the unit is
bits per second.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 100000000
Default value: 100000000
This field is relevant only if 'type' is 'trtcm'(2). This field
defines the peak burst size. If 'level' is 'packet'(1), the
unit is number of packets. If 'level' is 'byte'(2), the unit is
number of bytes.
Type: Create -- Optional
Modify -- Optional
Valid values: 4 - 65535
Default value: 65535
IDL series User Guide
Advertisement
Table of Contents
