Table of Contents
Advertisement
learning enable |
disable
status enable | disable
stickystatus enable
|disable
fdbmodify enable |
disable
aclglbdenyapply
Enable |Disable
aclglbtrackapply
Enable |Disable
184
bridge port is 256. This field is unused if the bridge port is created over an
PPPOE/IPOE interface or PPPOE/ IPOE is sensed. Any value of this field
shall be ignored for a bridge port created over a PPPOE/IPOE interface.
Type: Modify － Optional
The State of Learning on this bridge port. The value enable (1) indicates
that unicast Mac address learning is enabled and the value disable
indicates that unicast Mac address learning is disabled on this bridge port.
The default value of learning status for CPE/Downlink side bridge ports
shall be enable and for NET side bridge port default value shall be enable.
This field is unused if the bridge port is created over a PPPOE/IPOE
interface or PPPOE/IPOE is sensed. Any value of this field shall be
ignored for a bridge port created over a PPPOE/IPOE interface.
Type: Modify － Optional
The desired state of the bridge port. On creation the bridge port shall be
created in enabled AdminStatus by default.
Type: Modify － Optional
Indicates if the port has been set as sticky. The value enable(1) indicates
that the entries learnt on this port won't be aged out. It also indicates that
the entries learnt on this port shall not be learnt on any other port. The
entries learnt on this port can only be removed by management action or
by making the value as disable (2) so that the entries can be aged out.
This field is unused if the bridge port is created over an PPPOE/ IPOE
interface or PPPOE/IPOE is sensed. Any value of this field shall be
ignored for a bridge port created over a PPPOE/IPOE interface.
Type: Modify － Optional
This specifies whether this port can overwrite an existing forwarding
database entry. This field is unused if the bridge port is created over an
PPPOE/ IPOE interface or PPPOE/IPOE is sensed. Any value of this field
shall be ignored for a bridge port created over a PPPOE/IPOE interface.
Type: Modify － Optional
This specifies whether the global acl macentry deny list represented by
MO AclGlobalMacList is to be applied to this port or not. The default value
of this parameter shall depend on the port type. For Net side ports, the
default value shall be disable and for the cpe side ports the default value
shall be enable. This field is unused if the bridge port is created over an
PPPOE/IPOE interface or PPPOE/IPOE is sensed. Any value of this field
shall be ignored for a bridge port created over a PPPOE/IPOE interface.
Type: Modify － Optional
This specifies whether the global acl macentry track list represented by
MO AclGlobalMacList is to be applied to this port or not. The default value
IDL series User Guide
Advertisement
Table of Contents
