Table of Contents
Advertisement
Output:
Port Id
Max Unicast Addresses : 10
Port Oper Status
Sticky Status
Acl Global Deny Apply : Disable
Acl Global Track Apply : Disable
ProxyArpStatus
ArpTStatus
Port Type
Output Fields:
Field
Port Id
If Name
Max Unicast Addresses
Learning Status
Port Oper Status
186
: 10
Learning Status
: Disable
Port Admin Status
: enable
FDB Modify
: enable
Sensed IfIndex
: enable
Directed ARP status : enable
: trusted
Description
The bridge port id
The interface name associated with the given port.
This specifies the maximum number of unicast addresses, which can
be learnt from this port. This is modifiable when the admin status of
bridge port is disabled. Max of number of unicast entries that can be
learnt/configured on a birdge port on CPE side is 4096. The default
value for number of unicast entries that can be learnt or configured on
a CPE side bridge port is 4096. Max of number of unicast entries that
can be learnt/configured on a birdge port on NET side is 4096. The
default value for number of unicast entries that can be learnt or
configured on a bridge port is 4096. Max of number of unicast entries
that can be learnt/configured on a birdge port on downlink side is 256.
The default value for number of unicast entries that can be learnt or
configured on a bridge port is 256. This field is unused if the bridge
port is created over an PPPOE/IPOE interface or PPPOE/ IPOE is
sensed. Any value of this field shall be ignored for a bridge port
created over a PPPOE/IPOE interface.
The State of Learning on this bridge port. The value enable (1)
indicates that unicast Mac address learning is enabled and the value
disable indicates that unicast Mac address learning is disabled on this
bridge port. The default value of learning status for CPE/Downlink side
bridge ports shall be enable and for NET side bridge port default value
shall be disable. This field is unused if the bridge port is created over
an PPPOE/IPOE interface or PPPOE/IPOE is sensed. Any value of
this field shall be ignored for a bridge port created over a PPPOE/IPOE
interface.
The current operational state of the bridge port. If AdminStatus of the
: enable
: Disable
: Disable
: eoa-1
IDL series User Guide
Advertisement
Table of Contents
