Bridge Static Ucast Commands; Get Bridge Static Ucast; Create Bridge Static Ucast; Delete Bridge Static Ucast - Planet IP DSLAM IDL-2400 User Manual

Cautions:
An entry in this table shall not be applicable for a bridge port created over
PPPOE/IPOE interface.
References:
Bridge Commands

5.6.9 Bridge static ucast Commands

5.6.9.1 Get bridge static ucast

Description:
Use this command to get.
Command Syntax:
get bridge static ucast [vlanid <vlanid-val>] [ucastaddr <ucastaddr-val>]

5.6.9.2 Create bridge static ucast

Description:
Use this command to create.
Command Syntax:
create bridge static ucast vlanid <vlanid-val> ucastaddr <ucastaddr-val>
[portid <portid-val>]

5.6.9.3 Delete bridge static ucast

Description:
Use this command to delete.
Command Syntax:
delete bridge static ucast vlanid <vlanid-val> ucastaddr <ucastaddr-val>
192
IDL series User Guide