Table of Contents
Advertisement
Example:
$ ping 192.168.1.13
Output:
$ ping 192.168.1.13
64 bytes of data from 192.168.1.13, seq=0 ttl=64 rtt=0.000 msec
64 bytes of data from 192.168.1.13, seq=1 ttl=64 rtt=0.000 msec
64 bytes of data from 192.168.1.13, seq=2 ttl=64 rtt=0.000 msec
64 bytes of data from 192.168.1.13, seq=3 ttl=64 rtt=0.000 msec
-------------------- Ping Statistics --------------------
4 packets transmitted, 4 packets received, 0 percent packet loss
Output Fields:
FIELD
64 bytes of...
Seq
Ttl
Rtt
5.28.1.6 Remove
Description:
Use this command to remove a configuration or binary file stored on the unit
Command Syntax:
remove fname <file-name> [version <version>]
Parameters:
Name
fname <file-name>
IP DSLAM
Description
This denotes the number of bytes in the ping packet and the source IP Address.
This denotes the ping attempt counter value.
This is the Time to live for the packet.
This denotes the Round trip Time for the packet. A value less than 10ms is shown as
0.
Description
This specifies the file name, which needs to be removed. The user shall
specify the filename for files present in the system, as directories. The
directories are /nvram/bin/control/, /nvram/bin/control/,
/nvram/bin/dataplane/, /nvram/bin/dslphy, /nvram/cfg/factorydef/,
/nvram/user/,/sdram/cfg, /sdram/user.
Type : Mandatory
Valid values: string of upto 128 characters ('A'-'Z', 'a'-'z', '0'-'9', '-', '_')
683
Advertisement
Table of Contents
