Table of Contents
Advertisement
5.6.14 Transparent Bridging Table Commands
5.6.14.1 Modify bridge tbg info
Description:
Use this command to modify.
Command Syntac:
modify bridge tbg info [aging <aging-timeout> ] [slaveaging <aging-timeout> ]
[netaging <aging-timeout> ] [ floodsupport enable | disable ] [ bcastsupport
enable | disable] [ mcastsupport enable | disable ] [ mcastdrop enable | disable ]
[ dropiffdbfull <dropiffdbfull-val> ] [ resnetlearning <resnetlearning-val> ]
[resvmacprofileid <resvmacprofileid-val> ]
5.6.14.2 Get Bridge tbg info
Description:
Use this command to get bridging related global information.
Command Syntax:
get bridge tbg info
Parameters:
Name
Aging <aging-timeout>
slaveaging
<aging–timeout>
netaging <aging –
timeout>
IP DSLAM
Description
The timeout period, in seconds, for aging out dynamically learned
forwarding information from CPEs. The value 0 can be configured
when aging is to be stopped.
Type: Modify Optional
Valid values: 10 -1000000
The timeout period, in seconds, for aging out dynamically learned
forwarding information learned from the slave device. The
recommended value for this is more than or equal to the value for
dot1dTpAgingTimeOut. The value 0 can be configured when aging is to
be stopped.
Valid values: 10 -1000000
The timeout period, in seconds, for aging out dynamically learned
forwarding information from NET side port. This is used only for full
bridge configuration. The recommended value of net aging timeout
should be greater than that of the ìAgingî parameter. The value 0 can
be configured when aging is to be stopped.
Valid values: 10 -1000000
205
Advertisement
Table of Contents
