Table of Contents
Advertisement
5.13.14.4 Modify clfr tree profile
Description:
Use this command to modify.
Command Syntax:
modify clfr tree profile tname <tname-val>pid <pid-val> [isroot true|false]
Parameter:
Name
tname <tname-val>
pid <pid-val>
pname <pname-val>
isroot <isroot-val>
Example:
$ create clfr tree profile tname tree1 pid 4 pname srcip
368
Description
Name of the classifier tree
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Default value: -----
Profile Id. It should be unique within a tree
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 0xffffffff
Default value: -----
Name of the profile which is to be added
Type: Create -- Mandatory
Delete -- Optional
Modify -- Optional
Get -- Optional
Default value: -----
This specifies whether this profile is exported as a root profile or not. Only
root profiles of the nodes can be specified as an entry point on an interface.
Type: Create -- Optional
Delete -- Optional
Modify -- Optional
Get -- Optional
Valid values: true, false
Default value:FALSE
IDL series User Guide
Advertisement
Table of Contents
