Atm Vc Statistics Commands; Get Atm Vc Stats - Planet IP DSLAM IDL-2400 User Manual

5.5.6 ATM VC Statistics Commands

5.5.6.1 Get atm vc stats

Description:
Use this command to get statistical information about a specific or all ATM virtual
circuits.
Command Syntax:
get atm vc stats [ifname <interface-name>]
Parameters:
Name
ifname
<interface-name>
Example:
$ get atm vc stats ifname aal5-0
Output:
Low IfName
VPI
Total Tx Cells count : 250
CLPI 0 Rx Cells count : 10
Output Fields:
Field
LowIf
VPI
VCI
VC IfName
Total Tx Cells count
Total Rx Cells count
CLPI 0 Rx Cells
Rx Pkts Rejected count
IP DSLAM
Description
This specifies the Virtual Circuit. If this is not specified,
then information for all VCs is displayed.
Type : Get – Optional
Valid values : aal5-0 - *
: atm-0 VC IfName
: 1 VCI
Total Rx Cells count : 20
Rx Pkts Rejected count : 0
Description
This specifies the ATM port name. It can be : atm-0
It is the Virtual Port Identifier.
It is the Virtual Circuit Identifier.
The name of the aal5 (aal5-0 etc) interface, for which statistics
needs to be retrieved.
The total number of valid ATM cells transmitted by this interface.
The total number of valid ATM cells received by this interface.
The number of valid ATM cells received by this interface with
CLP=0.
The total number of valid ATM cells discarded by the interface.
: aal5-0
: 1
171