Table of Contents
Advertisement
Peak Max Burst Size
5.21.8 Scheduling profile class Commands
5.21.8.1 Get sched profile class
Description:
Use this command to get.
Command Syntax:
get sched profile class [name <name-val>] [classid <classid-val>]
5.21.8.2 Modify sched profile class
Description:
Use this command to modify.
Command Syntax:
modify sched profile class name <name-val> classid <classid-val> [param1
<param1-val>] [param2 <param2-val>] [param3 <param3-val>] [param4
<param4-val>] [param5 <param5-val>]
Parameters:
Name
name <name-val>
classid <classid-val>
param1 <param1-val>
552
is byte, the unit is bits per second.
This field is relevant only if 'type' is 'trtcm'(2). This
field defines the peak burst size. If 'level' is
'packet'(1), the unit is number of packets. If 'level'
is 'byte'(2), the unit is number of bytes.
Description
Name of the scheduling profile.
Type: Modify － Mandatory
Get － Optional
Scheduling profile class identifier
Type: Modify -- Mandatory
Get -- Optional
Valid values: 1－
8
This specifies the first parameter for the class
queue that is used in the scheduling algorithm of
the profile. For PP scheduling algorithm, this
parameter specifies the weight of the class
queue on the scale of 1-100. Value 100 means
IDL series User Guide
Advertisement
Table of Contents
