Planet IP DSLAM IDL-2400 User Manual page 319

Ip dslam
Table of Contents

Advertisement

[mgmtvlanid <mgmtvlanid-val>] [priority <priority-val>] [trfclassprofileid
<trfclassprofileid-val> ] [Ctlpktinstid <ctlpktinstid-val>] [ ctlpktgroupid
<ctlpktgroupid-val> | none ] [mgmtsvlanid <mgmtsvlanid-val>] [m2vmacdbid
<m2vmacdbid-val> |none] [ mgmttvlanid <mgmttvlanid-val> ]
Parameters:
Name
ifname
<interface-name>
ip <ip-address>
IP DSLAM
Description
This parameter specifies the interface index used for the Ethernet type of
interfaces. Valid Values starts from eth-0 and continues to eth-*
Type
: Create
Valid values : eth-0 - *
This parameter specifies the IP address configured for the interface. This
is required to be configured only if this interface is used for management
IP traffic. If it is not configured and 'etherUseDhcp' is configured as
GS_FALSE, then management IP traffic will not flow through this
interface. 'Modify' of IP Address for an Ethernet interface shall be
supported only if some IP address is configured on the interface or
'etherUseDhcp' was configured to "GS_TRUE" previously. If Usedhcp is
GS_TRUE and 'modify' is done for this field, then Usedhcp field shall be
set to GS_FALSE. Both 'Usedhcp' and this field shall not be specified
together.
Type
: Create - Optional.
Modify - Optional
Valid Values: Any valid class A/B/C / Classless IP address.
Default Value: None
– Mandatory
Delete
– Mandatory
Get
– Optional
Modify – Mandatory
319

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idl-2401Idl-4800Idl-4801

Table of Contents