Table of Contents
Advertisement
Curr Status
Curr Snr Margin(dB/10)
Curr Atn(dB/10)
CurrAttainable Rate(bps)
Curr Output Pwr(dB/10)
GsOpState
GsActualStandard
GsTxAtmCellCounter
GsRxAtmCellCounter
GsStartProgress
GsIdleBertError
GsIdleBertCells
GsBertSync
GsBertError
Data Boost Status
Chan Perf CD
Chan Perf BE
PM State
Chan Perf Cu
250
Indicates current state of the ATUC line. This is a bit-map
of possible conditions.
Noise Margin as seen by this ATU with respect to its
received signal in tenth dB.
Measured difference in the total power transmitted by the
peer ATU and the total power received by this ATU.
Indicates the maximum currently attainable data rate by
the ATU. This value will be equal to, or greater than the
current line rate.
Measured total output power transmitted by this ATU.This
is the measurement that was reported during the last
activation sequence.
Operational state of the Xcvr.
Actual standard used for connection, based on the
outcome of the negotiation with the Remote Unit.
Provides Tx ATM cell counter.
Provides Rx ATM cell counter.
Defines the current detailed start up state of Xcvr. 0x0ñ
startup not in progress; 0x0 ñ 0x0FFF
Handshake/Training/ Profile Management/ Fast Retrain
inprogress; 0x8000 ñ 0x8FFF DSP firmware DownLoad in
progress; 0xF000 ñ 0xFFFF illegal Parameter
Number of bit errors.
Number of idle cells.
Indicates whether the Signal is in Sync or not.
Provides the number of bit errors detected during BERT.
Conexant parameter that indicates whether DataBoost is
utilized for the connection.
The near-end delineated total cell count performance
parameter is a count of the total number of cells passed
through the cell delineation and HEC function process,
operating on the ATM Data Path, while in the SYNC state.
(Not available for ADSL)
The near-end idle bit error count performance parameter is
a count of the number of bit errors in the idle cell payload
received in the ATM Data Path at the near-end. (Not
available for ADSL)
The Line Power Management state. (Not available for
ADSL)
The total number of data-only cells received by ATUC.
IDL series User Guide
Advertisement
Table of Contents
